Created March 14, 2003 © Copyright SuzShook
Property of SuzShook
| : | : | |
| : |
|
: |
| : | : | |
This tutorial is my own creation;
however, most of the techniques used in this tutorial, I have learned from others.
Therefore, if you recognize any contribution you have made, I thank you.
And I thank you as well for respecting this as my work by not posting it,
in whole or in part,
in any other location without written permission from me.
Individuals and PSP graphics groups are invited to share my tutorials with others with TEXT LINKS ONLY.
You can e-mail me to let me know you are adding one or more of my tutorials to your list if you like -
it's always fun to know who is doing them.
This tutorial will teach you how to use some of the basic customization available in Paint Shop Pro 8 to change PSP's toolbars - how to add or remove tools from toolbars, how to move tools from one toolbar to another, how to add keyboard shortcuts to tools, and even how to create your own personalized toolbars. Hope this tutorial helps you make your workspace work for you.
This tutorial assumes you are a relatively new user to Paint Shop Pro, Version 8, and is written in and for that version. Many screen shots in this tutorial are resized - your work will be larger than this.
Supplies - For this tutorial, you will need the following:
- Jasc's Paint Shop Pro 8 - you can get the 30-day trial version HERE.
~ ~ ~ ~ ~ ~ ~ ~ ~ ~
OK, now we're ready to begin. Grab your mouse and let's get started.
Remember to save often.
~ ~ ~ ~ ~ ~ ~ ~ ~ ~
STEP 1
Paint Shop Pro 8 gives the user almost total control over the program's toolbars. You can move commands from toolbar to toolbar, add almost any command to a toolbar, add tools to palettes, add scripts to toolbars, and even create your own custom toolbars. When you open the Customize dialog from the View menu, the entire Paint Shop Pro workspace transforms into customize mode. Your controls for customizing your toolbars are the Commands, Toolbars, and Keyboard tabs of the Customize dialog.
To activate the Customize dialog:
- Choose View...Customize; or
- Right click on any toolbar and select Customize from the context menu.
To select which toolbars are displayed, click the Toolbars tab. Mark the check box next to the name of the toolbars you want to display.
During this session, you will be able to either add tools/commands to or remove tools from all visible toolbars. You can turn off, or hide, any of the toolbars by clearing the check box next to its name. Notice that you cannot hide either the Menu Bar or the Layer Palette Toolbar.
As distributed by Jasc, PSP8 has the Standard, Photo, and Script toolbars enabled across the top, just below the Menu Bar, and the Tools toolbar docked vertically along the left side of the workspace.
For demonstration purposes in this tutorial, be sure the Tools toolbar is checked.
STEP 2
To remove a tool from a toolbar, click the item and drag it to an area without a toolbar - like into the workspace. The cursor will change to the ICON icon with an "x" -
. Release the mouse button anywhere while the ICON icon has the "x", and the tool is gone.
Just for practice, let's remove the Move tool from the Tools toolbar. Don't worry, we'll put it back in the next step:
Click the Move tool Drag it to an open
area on the workspaceDrop it by releasing
the mouse button.
Presto, gone from the toolbar!
Note: An alternate method of removing a tool from a toolbar is to right-click on the object you want to remove and choose Delete from the context menu.
STEP 3
To add commands or tools to a toolbar:
- Click the Commands tab of the Customize dialog.
- From the Categories list, select a category - PSP groups related commands into categories.
Note: The categories listing may seem rather haphazard, but it really isn't. PSP lists the categories according to the way the menus appear across the Menu Bar, followed by the remaining categories, toolbars, and context menus.- From the Commands list, click and drag a command or tool icon to a toolbar.
Note: Same logic here - the commands are listed in the default order they fall on the menus or toolbars.Let's put that Move tool back on the Tools toolbar. In the Categories list (red arrow), scroll down until you find the Tools category. In the Commands list (blue arrow), scroll down until you find the Move tool, and click on it:
When you press the mouse button, the cursor changes to the ICON icon
. Drag the Move tool to the Tools toolbar - move it around until the heavy I-bar is where you want the Move tool located - and drop it by releasing the mouse button.
Drag the Move tool
to the toolbarDrop it by releasing
the mouse button.
And there it is, right where it was before we removed it.
STEP 4
To move a tool from one location to another, or from one toolbar to another, click on the tool, and drag to the new location/toolbar.
Note: To COPY a tool from one location to another, click on the tool, and while pressing the CTRL key, drag the tool to the new location.Many of the tools on the toolbar exist only on the flyout menus. To move a tool from a flyout menu to the toolbar, click the down-arrow on the tool whose flyout menu contains the tool you want to move. Drag the tool from the flyout to the toolbar.
For example, if you want to move the Magic Wand from the Selection flyout to the Tools toolbar, click the Selection tool down-arrow - the flyout appears:
Click the Magic Wand tool - notice the heavy black line surrounding the tool to signify it has been selected:
Use your left mouse button to move the Magic Wand tool to the toolbar - the heavy I-bar indicates where it will be placed. When you have the I-bar where you want the Magic Wand, drop it there by releasing the mouse button.
Drag the Magic Wand
tool to the toolbarDrop it by releasing
the mouse button.
And that's all there is to it.
I also moved the Freehand Selection tool from this flyout back to the toolbar, as well as many of the other tools from flyouts. You can set the Tools toolbar up the way it's comfortable for you.
You can move a tool to a flyout in much the same manner. Activate the flyout by clicking on the tool down-arrow. Then, grab the tool from the toolbar (or from the Commands list window) and move to the flyout - the long I-bar indicates where the tool will be placed. Here, I'm returning the Magic Wand tool to the Selection flyout:
I find it much easier to move tools from the Commands list window to the flyouts than to try to move the tools from the toolbar. Either way works, but if you use the Commands list, don't forget to remove the tool from the toolbar once you've added it to the flyout.
STEP 5
If you run into trouble customizing your Tools toolbar, you can always reset it to the factory default settings. To reset a toolbar:
- Click the Toolbars tab.
- In the Toolbars list, click the name of the toolbar to reset.
- Click the RESET button.
To reset all toolbars, click the RESET ALL button - all toolbars will revert to the program's default settings, and you will lose any customization you have done.
STEP 6
You can easily create a custom toolbar for your favorite commands or tools. To do this, on the Toolbars tab, Click NEW.
This will open the Toolbar name dialog. Type a name for the new toolbar and click OK - I called mine SuzTools. A small empty toolbar will open in the middle of the workspace, which will probably be right in the center of the Customize Toolbars dialog. If so, move it to a blank area of the workspace so you can watch as you add tools. Here's my SuzTools toolbar before adding any tools - not too impressive at this stage!
Add commands and tools to your new toolbar as we did above in Step 3. You can even add tools to flyouts if you wish. Notice that each tool you add to your toolbar has the drop-down arrow, so you can create flyouts if you wish. Once you terminate the Customize dialog, these arrows will disappear except where tools have been added to a flyout.
You can move the tools around on your toolbar while you are in customize mode - just drag and drop. If you want to add separators between elements in your toolbar, right-click on any item in the toolbar and choose Start from the context menu. Remove separators the same way - this is a "toggle" command.
You can use the Customize dialog to RENAME or DELETE your personal toolbars, but you can't RESET them - they have no "factory-set" defaults.
When you are done building your toolbar, click CLOSE on the Customize dialog. Your customized toolbar will now show up whenever you list toolbars. Once you've built your personalized Tools toolbar, you can deactivate the PSP default Tools toolbar, docking your toolbar on the left side of your screen. To do this, right-click on any toolbar and choose ToolBars from the context menu (or choose View...Toolbars). The active toolbars are those whose buttons have been depressed - they appear as a darker shade of blue.
In this diagram, I have deactivated the PSP Tools toolbar - the Browser, Effects, and Web toolbars are also inactive. Notice, even my SuzTools toolbar shows up.
Customization Note: I not only created my own Tools toolbar, but I also created my own Standard toolbar - calling it SuzStandard, of course. On this toolbar, I put the tools I use most frequently, much like I have it set up in PSP7. Here's my "new" standard toolbar, the SuzStandard toolbar, printed in 2 rows to fit on screen (in reality, this is just one continuous toolbar across the top of my screen):
STEP 7
You might want to add commands and/or tools to other toolbars, including the Layer palette. As distributed by Jasc, the Layer palette has icons for adding masks to and from disk and to and from alpha channels. If you use selections frequently, you might want to add the icons for adding selections to and from disk, and maybe even to and from alpha channels. Let's try that.
Open the Customize dialog. If you keep your Layer palette rolled up, hover your cursor over it to open it. Click on the Toggle Rollup button (small left-pointing arrow in the upper right hand corner) to change it to a up-pointing arrow (see green arrow in following image) - this will keep the Layer palette open while you are editing it.
In the Customize dialog, Commands tab (blue arrow), find Selections in the Categories window (red arrow), and scroll down to find the Load Selection and Save Selection commands in the Commands window(green arrow):
Click and drag the commands to the Layer palette. Here's my Layer palette toolbar with the Save and Load Selections commands added:
When you have finished updating your toolbars, click CLOSE on the Customize dialog.
STEP 8
There's only one more thing to learn about customizing our toolbars in PSP8, and that's how to add a keyboard shortcut to a toolbar item. When you look closely at the Tools toolbar, you'll see Jasc has only assigned one keyboard shortcut to each "group" of tools. In other words, S is the shortcut for the Selection tool, but there's no shortcut key assigned to either of the other selection tools grouped with the Selection tool on the Selection tool flyout (the Magic Wand and Freehand Selection tools). At the very least, I wanted to assign a shortcut key to the Magic Wand, because I use it all the time.
To add shortcut keys to tools, or to change the shortcut keys already assigned to tools, open the Customize dialog, and click on the Keyboard tab.
In the Set Accelerator for drop-down list (red arrow), select which application's shortcuts you want to assign - choose Browser for the Browser window, or Default for PSP's main workspace.
In the Category drop-down list (green arrow), select a category to find all commands within that category.
Note: Though the categories on this tab are in the same order as on the Commands tab, the commands listed in the Commands window on this tab are in alphabetical order within each category.Let's select the Tools category. Notice that as you scroll down through the tools, the currently assigned shortcut key appears in the Current Keys window (green arrow). In this image, you can see that the Clone tool has been assigned the keyboard shortcut C:
If there is no assigned key, that window is blank. Scroll down to the Magic Wand - note that the Current Keys window is blank. Move your cursor to the Press New Shortcut Key window, and type M. If the key you select is currently assigned, the current assignment will be listed below the window. As you can see, M is assigned to the Move tool (red arrow).
If you want to reassign M to the Magic Wand tool, click on the ASSIGN button (blue arrow). If you want to leave the M as assigned, choose another letter and type in the box - don't try to erase the M with the DELETE key or the BACKSPACE key - this dialog will think you want to assign that key to the Magic Wand tool. Just type the new letter and it will replace the M - I finally chose W for my Magic Wand.
Continue in this way, assigning keyboard shortcuts to your tools. I assigned keyboard shortcuts for most of my tools, especially the ones I use most frequently. When you are finished, click the Close button. Now when I hover the cursor over the Magic Wand tool, the tool tip will contain the keyboard shortcut I assigned:
To view all shortcut keys that have been assigned, including the ones you have assigned, choose Help...Keyboard Map to open the Help Keyboard dialog. In the Show Accelerator for drop-down list, pick which application's shortcuts you want to view - the choices are Brower or Default (PSP's main workspace). In the Category drop-down list, select a category, or select All Commands to list all commands at once. Click any column heading to sort alphabetically by that column. Finally, use the Print ICON to print the current category of shortcut keys.
That's about it. You have the tools now to build your own customized toolbars. Have fun, and use your new skills to make your workspace work for you. When you've finished setting up all your toolbars the way you want them, save your workspace (File...Workspace...Save). Then, if you ever need to reinstall or repair PSP, you can reload your customized workspace with all your settings intact, because the saved workspace "remembers" your menu, palette, and toolbar settings, location, and docking status.
If you want to tailor the PSP menus, or build your own menus, try my Customizing Menus in PSP8 tutorial.
If you have any problems, comments, or questions, please do not hesitate to Email me.
Thank you, Camp Ratty, for this great honor!
